Residential Swimming Pool Regulations in Los Angeles

Residential Swimming Pool Regulations in Los Angeles, California

Updated residential swimming pool regulations in Los Angeles. The requirements for the design and construction of swimming pools in Los Angeles are regulated by the following codes and regulations:

  • The State provisions for Public Swimming Pools are found in 2016 California Building Code (CBC) Chapter 31B
  • 2017 Los Angeles Building Code (LABC) Sections 3109, 6109, and 8118 shall apply to all pools

Permanently Installed Residential Outdoor In-Ground Swimming Pool or Spa

LA City Green Building Code Section 4.304.5 requires any permanently installed outdoor in-ground swimming pool or spa for one and two-family dwellings to be equipped with a cover having a manual or power-operated reel system.

General Permit Requirements for Building a Private Pool?

A Combined Building-Mechanical permit is required to be obtained to construct private pools pursuant to LABC Section 107.2.2. However the exception to this requirements is neither building nor combined building-mechanical permits are required for the building the following pools:

  • Swimming, bathing, and wading pools not exceeding 24 inches in depth and not exceeding a surface area of 250 square feet.

mechanical permit shall be obtained for any additional gas or electrical outlets installed for any of the exceptions noted above. Moreover, a grading permit shall be required to obtain for excavations when the pool requires a building permit or combined Building-Mechanical permit and the lot is located in the grading hillside area.

Pool Enclosure Construction Permit Requirement Los Angeles

A separate permit to construct the pool enclosure is required, if any portion of the enclosure is constructed by a masonry contractor with stone or concrete higher than 3.5 feet as per Section 106.2 of LABC.

Pool Building Plan Requirements for City of Los Angeles

Two sets of pool building plans and one set of calculations are required for all pools at the time of permit issuance. Each set of plans must include a fully dimensioned plot plan, showing the location of the pool, pool enclosure, and all accessory equipment and their setbacks to all adjacent buildings, property lines, and slopes. An exception to the pool building plan requirement however is only one set of plans and no calculations are required, when there is a valid City of Los Angeles Standard Plan for the swimming pool on file with the Department. Pool building plans and calculations must be signed and stamped by a California registered engineer or licensed architect.

Zoning Code Requirements Building Pool

All pools shall comply with the use and location requirements of the Zoning Code. Pools shall not be located in any required yard in which fences more than 3½ feet in height are prohibited as outlined in LAMC Section 12.21.C1.g. Residential buildings shall comply with any additional regulation imposed by an ordinance, “Q” or “T” condition or any other zoning regulations. A pool or spa which are higher than 30 inches above ground are not permitted within the required yards for the property.

Glazing Swimming Pool Building Code Requirement in Los Angeles

Glazing in walls of a building and fences used as the barrier for swimming pools and spas shall comply with the requirements set out pursuant to LABC Section 2406 when all of the following conditions are present:

  • The bottom edge of the glazing is less than 60 inches above the pool side of the glazing
  • The glazing is less than 5 feet from swimming pool or spa water’s edge

Private Swimming Pools Single-Family Homes

For private swimming pools located at single-family homes, the construction of a new swimming pool or spa or the remodeling of an existing swimming pool or spa shall be equipped with at least two of the seven drowning prevention safety features as listed under Section 3109.4.4.2 of the LABC.

Moreover, the exception listed under Section 3109.4, for residential swimming pools shall not waive the requirements to provide a pool enclosure complying with Section 3109.4.1 through Section 3109.4.3. Los Angeles pool builders must comply with all codes and regulations.

Factors That Dictate How Long it Takes to Build a Pool

Factors That Dictate the Amount of Time Required to Finish Building a Pool

The factors that dictate how long it takes to build a pool include designing, permits, planning, materials, steel, plumbing, electrical, pool liner, decking, landscaping, customizations.

When people ask us “How long does it take to build a pool?” first we respond by providing them with an average amount of time.Then, we go into further detail about these specific factors.

1. Designing the Pool (1 to 2 weeks)

The designing aspect of building a swimming pool can range anywhere from one to four weeks. This amount of time is usually dependent on the decision making of homeowners.

2. Pool Permits and Scheduling Construction Activities (2 to 6 weeks)

Once a design is decided upon, the required permits must be approved in order for the job to begin. A geologist must perform a proper examination in order to dictate whether or not the area is suitable for having a pool.

Permits can only be provided after an examination completed by a geologist properly dictates that the desired area is suitable for building a pool.

3. Digging the Hole for the Swimming Pool (1 to 2 weeks)

Digging the hole and scheduling all of the required construction and activities ahead of time are an important factor of helping the team stay on track. The amount of time it takes to dig the hole is based on geological factors of the area. If the area that requires digging into is soft, it will be easier to dig hence much faster to dig relative to if the area was hard.

4. Setting in Rebars, Plumbing and Electrical (1 to 3 weeks)

Rebars made out of steel are bent into forming the desired shape and size of the pool. Once rebars are set up in the desired shape, they act as the inner main frame of the pool. Plenty of pools have completely different plumbing and electrical requirements so depending on the particular home this step may be faster or longer. At certain times, plumbing and electrical work can be complex and required more time as oppose to more simple designs.

5. Filling in the Main Pool Liner Material (1 to 3 weeks)

The material that is used to fill it is a varying factor on how long this step will take to complete. There are three main types of pools that are usually built. These three types of pools are concrete, vinyl-lined and fiberglass.

Concrete pools are usually called gunite or shotcrete. This is due to the fact that concrete is shot from a gun onto solid steel rebars. The steel rebars are bent into forming the desired shape and size of the pool. Once rebars are set up in the desired shape, they act as the inner frame of the pool which concrete will be poured onto.

If your home is located on a hillside, a structural concrete pool is another type of concrete pool that can be built for you. This type of concrete pool is built on a foundation similar to that of a house.

Concrete pools are stronger and more durable compared to other types of pools. In addition, concrete pools can be remodeled and redesigned. Although concrete pools are the most durable type, they take longer to complete building compared to vinyl-lined and fiberglass in most cases.

The process of installing a vinyl or fiberglass pool relatively easy compared to concrete pools. This is due to the fact that, this due to the fact that manufactured pool liner is brought in and installed in most cases.

6. Decking and Customizations (1 to 5 weeks)

Other major factors of how long it takes to build a pool are decking and customizations. Depending on the decking requirements and custom construction requirements, the time it takes to complete building a pool can vary.

If the decking is a simple design and there aren’t too many unique custom construction requirements, the amount of time it takes to complete the job can be relatively fast compared to building a pool with a difficult design and many customizations.

On Average, It Takes About 5 to 10 Weeks to Build a Pool

When adding all aspects together, it takes an average of about 5 to 10 weeks to finish building a residential pool. If you’re serious about getting a pool built, the experts at All American Builders can help you through every step of the way. Our Los Angeles pool builders are known for offering the highest quality services for the lowest prices around!

How Long Does it Take to Build a Pool?

How Long it Takes to Build a Pool

On average, it takes about 5 to 10 weeks to complete building a pool.

There are various factors that dictate how long it takes to build a pool. Two of the main factors that dictate how long it takes to build a swimming pool are the type of pool and the geological situations of the location.

Different Types of Pools Require Different Amounts of Time to Complete

The three main different types of pools are concrete, vinyl-lined and fiberglass. Concrete pools are the most durable of the three, although they take longer to complete building. Vinyl and fiberglass pools are relatively easy to build compared to concrete pools do to the fact that pre manufactured pool liner is brought in and installed.

How Geological Factors of an Area Affect The Time it Takes to Build a Pool

The geological factors make a difference due to the fact that the hardness of the material that must dig out makes a difference on how long it takes to dig it out.

If the material that must be dug out from the desired location of the pool is soft soil, it will be relatively easy to dig the hole for the pool. On the other hand, if the material that must be dug out is hard, it will be more difficult to dig out compared to soil. If a homeowner wants to build a pool in their backyard, they must have a geologist perform a proper inspection of the area in order to dictate the requirements and whether or not the area is suitable for building a pool.

Depending on your homes circumstances, the amount of time it takes to build a pool in your backyard will vary. Check out the factors that dictate how long it takes to build a pool for more information.

If you are serious about getting a getting pool built in your backyard, get in touch with our experts to help you get started right away. Our experienced Los Angeles pool builders offer the highest quality construction services for the best possible prices.

BACKYARD PATIO, POOL, AND PATIO SPACE REMODEL

Backyard Patio, Pool, and Patio Space Remodel

The Backyard Patio, Pool Scape, and Patio Space

The backyard patio is an essential part of the pool scape and defines how you will enjoy your time in and around your patio space. The backyard patio often times can be unique or simple depending on your style. When deciding on where to start on your backyard renovation or patio remodel project, its important that your patio design conforms with or is in accordance with your lifestyle, the style of your swimming pool and your home.

Backyard Patio Remodeling Designs

There are many different backyard patio remodeling designs from transforming your old patio into a garden oasis or perhaps you want to transform your backyard patio into a relaxing environment by adding an infinite pool. Perhaps you want to transform your patio with a more festive environment by adding a fire pit, a outdoor lounge area with a bar. Regardless of the reason(s) for beginning your backyard patio remodeling project, make sure you have fun! Residential patios can be used for a variety of poolside activities, including relaxing, swimming, sun bathing, dining, socializing, and more. Below is a list of backyard patio remodeling ideas

Find the Right Backyard Patio Contractor for your Remodeling Project

The homeowner-contractor relationship will be a determining factor in your project’s success. Residential remodeling projects can sometimes get stressful, therefore, hiring the right contractor or construction company should be at the top of your priority list. Having a list of questions to ask the backyard remodeling contractors can help you evaluate and compare your options.

Identify Potential Challenges Associated with the Renovation Project

Identifying potential challenges prior to commencement of your renovation project is vital. Some general factors to consider when renovating your patio are:

  • Sun/Shade Area
  • Lack of Space
  • Drainage Issues
  • Lack of Privacy
  • Partial Landscape on Steep Slope or Hillside
  • Methods of reducing the intensity of outdoor noise in your yard using plants

As such, addressing potential problems or challenges associated with your patio landscape area will help you create that well-balanced and inviting space that brings you peace of mind rather than headaches.